Detailed introduction

PLYWOOD COLD PRESS/PRE-PRESS MACHINE
Brief instructions
Features:
1. The main frame is welded and formed by one-time blanking of national standard steel plate. The structure is reasonable. The force points are calculated strictly. The rigidity is good.
2. The domestic high-quality oil cylinder is adopted, and the oil cylinder is placed underneath. The main parts are selected from high-quality hydraulic parts to ensure the replacement of the insert;
3. Simple maintenance and easy to use;
4. Can be designed according to user requirements specifications.
5. This machine is the key equipment for producing pre-pressing sections such as plywood and film faced plywood and so...

Technical specifications:

Machine model	BY814X8/4-IIz
Nominal pressure	4000KN(400TONS)
Boards in-feeding direction	Horizontal
Max.opening	1500mm
Dimension of working platform	1380mm x 2700mm
Dimeter of plunger cylinders	Ф320mm(Wuxi)
Number of plunger cylinders	2 Pcs
Diameter of side helpful cylinders	Ф60mm(Wuxi)
Number of side helpful cylinders	2Pcs
Allowed pressure of plunger cylinders	≤26Mpa
Stroke of plunger cylinders	1000mm
Position of plunger cylinders	Upside
Pressure of unit plate blank	12Kgf/cm2
Dimension of the board	2560mm x 1280mm
Allowed pressure	≤26Mpa
Machine net weight	17000Kgs
Control method	Automatic pumping station
Thickness of upper and lower crossbeams	900mm
Thickness of steel plate	35mm
Thickness of active crossbeam	400mm
Thickness of steel plate	20mm
Chain and roller transports device	YES
Frame structure	Composite frame for loading container